Replacing your house roof is something that you will need to do once every few decades, or even sooner depending on the area you live in, and the type of material you’ve chosen before. This is a dreadful task, and we tend to try and postpone it for as long as possible until we start noticing the warning signs. The main reason for that is that we don’t actually know when the task will be done, and how much time would we need to wait and figure things out until the project is over. If you are interested to learn more about these timelines, you’ve come to the right place. Keep on reading if you want to find out how long does it take to replace a house roof.
What are the factors?
The first thing we are going to talk about is the factors that are going to affect the whole process. The number one thing is the condition of your home cover and the overall state it is in. If it is damaged and if there are a lot of holes or things that need to be patched, it is going to take a lot more time. Note that if the covering is in a good state, then it is going to be much easier for the professionals to remove it and then replace with without fearing that there might be some damage. If you know that the roof is damaged, and if there are leaks in your attic or home, then you should plan ahead and you should calculate the time needed for those holes to be patched and for the new unit to be installed.
The next thing that needs to be considered is the size of the home. Of course, the bigger the property is, the more time it is going to take to finish the whole job. Once again, if the home is large and if the previous covering was severely damaged, then the whole project may take double the time that would take a smaller home with a mint condition roof.
Lastly, you should also know that the type of material that you choose for the new unit is going to affect the whole process. The good thing is that most materials will take pretty much the same time, and you should not be worried too much about this. When choosing the right type for your needs, make sure to opt for a material that is durable and that is going to provide the needed protection depending on the weather conditions in your location.
On websites like oahu-roofing.com, you can see that a good roofing service can help you determine if you should just repair your roof, or if it needs to be fully replaced.
Note that if you are doing fixing instead of replacement the time needed will vary, and in some cases, fixing the whole thing may even take more time than just fully changing it. So, talk to the service of your choosing, and see which is the best way forward depending on the state of the coverage, and your specific desires.
How long does it take depending on the type?
Now let’s see how long will this process take depending on the type of rooftop that you want to install. The tile coverage is going to take the longest, between five and ten days, and the main reason for this is the heaviness of the material and the fact that it needs to be installed with extreme care. In addition to this, water and moisture proofing is needed so that there are no leaks after a while.
The second-longest time will take natural slate, and even though the investment in this material is higher than pretty much anything else you will find on the market, it is also the most durable type. It can last up to 8 decades, as long as it is properly installed and maintained. The time needed for the natural slate to be installed is about one week, and when it comes to synthetic slate, it would take about three to five days to get it done.
Flat and wood shake types of covering take the same amount of time, and they should be done in about three to four days. Both of these materials need to be installed carefully, and a specific type of drainage is needed for the flat type.
Next, we have shingle and tin roofing, and the most commonly take one to two days to get fully replaced ad installed. These materials are prefeed because, as long as there is no significant damage to the current unit that you have right now, they can be easily replaced, and the sheets are pretty large and don’t need a lot of time or skills to be installed.
Finally, we have rubber and asphalt, and if you are looking for something that will be done in just a day or two, then these are the materials that you want to go for. When it comes to rubber, it is preferred since it is going to provide a lot of protection against heat and even fire, and it is really lightweight. It won’t add any additional pressure on your home, and just one membrane is added as coverage and then it is cut on the spot.
Asphalt is the most commonly used type, so most of the roofers are going to be able to get a perfect job done. Note that even with removing the previous coverage that you had and installing the new one, it will not take more than two days.
As you can see, you have a lot of options to choose from, and the main thing is to collaborate with a reliable service that will have your best intentions in mind. The whole process will take less than 10 days, no matter the materials you choose, and if you have coverage that is already in mint condition, and if you opt for something like asphalt, the job will get done in a day. So, it is better to stop delaying this process, and do your best to protect yourself, the members of your family, and your property by replacing the old roof.
